MBRP S7108 User Manual
Page 4
S7108 © 12/12
PAGE 4 OF 4
6. Slide a 2 ½” Band Clamp onto each Tailpipe. Attach the
Mufflers to the Tail Pipes. Using the fasteners provided attach the
Mufflers to the M8 Exhaust Hangers. Refer to Figures 10 & 11.
7. Install the Exhaust Tip to the Muffler. Refer to Figure 12.
Align the exhaust as required. Starting at the Muffler tighten all clamps
and connections.
8. Check along the whole length of the exhaust system to ensure that
there is adequate clearance around the spare tire, fuel and brake lines
or any wiring. If any interference is detected relocate or adjust.
Congratulations! You are ready to begin experiencing the improved power, sound and driving experience of
your MBRP Inc. performance exhaust system. We know you will enjoy your purchase.
Figure 10
Figure 11
Figure 12