D3rcam menu, Unit configuration, D3rcam men – ADC DL3XR-FCA100 User Manual
Page 42: Unit configuration screen, D3rcam m, Onfiguration
Remote Configuration
LTPS-UM-8013-03
34
August 30, 2002
D3LX CO and RMT Modules
D3RCAM M
ENU
The D3RCAM Main Menu (as shown in
) displays following configuration options:
Figure 21.
D3RCAM Menu Tree
U
NIT
C
ONFIGURATION
Use this procedure to configure each D3LX RMT module installed in the remote chassis. Refer to your work order
for configuration settings.
Figure 22.
Unit Configuration Screen
Please note that it is not necessary to configure each card in a working and protect system. Both
working and protect cards are provisioned at the same time. Provisioning can be done from
either the CO or remote end.
Additionally, configuration must be done prior to testing an D3LX circuit from the remote end.
Alarms
Display
Status
Unit
Configuration
System
Date/Time
System
Maintenance
Help
Display Active Alarms
Display Alarm Summary
Display Shelf Status
Display D3LX Status
Clear Alarm History
Display Alarm History
Protection Switch Status/Commands
Reset/LED Test Command
Execute ACO (Alarm Cut-Off)
D3LX Group 1
D3LX Group 2
Loopback Status/Commands
Display Inventory