Penske Racing Shocks PS-Mustang-Strut - Manual (Page 10)

Mustang Strut 2011/2012
10
7.
You are then ready to remove the Ring Nut from the shaft. Hold the shaft in the TL-SH-CLAMP
(i), and with a ¾” socket, remove the nut. You can then make changes to the shim stack and
change pistons if desired. See below for our piston tuning guide. After desired vavling is
installed, tighten ring nut and torque to 25 ft/lbs.
Ring Nut (NT-02R)
TL-SHAFT-CLAMP (i)
Rebound Stack (VS-__)
Piston (PI-____4)
Piston Band (PB-__)
Compression Stack (VS-__)
Shaft (SH-175A-DB)
Jet (JT-76RD)
Top Out Plate (VW-100)
Ring Nut (e) (NT-02R)