Penske Racing Shocks PS-Mustang-Strut - Manual (Page 8)

Mustang Strut 2011/2012
8
Disassembly Procedure:
This is a brief explanation of how to disassemble your strut unit so you can service and or re-valve you
strut.
1.
Remove lower mount.
2.
Remove Dual Bleed Adjuster Knob assembly.
a.
Do this by turning rebound knob counter clockwise unit entire assembly (a) is
unthreaded.
b.
**a small steel washer and aluminum plug (b) should be with adjuster assembly**
3.
Clamp outer tube into TL-BDCL-MUSTANG-OUTER (c). Then using a 7/8 socket, remove both
jam nuts (d).
(b)
(a)
(d)
(c)