Mustang strut – Penske Racing Shocks PS-Mustang-Strut User Manual
Page 12
Reassemble:
Once you have your desired piston and shim stack on the shaft assembly and the ring nut is torque, you
are now ready to reassemble the inner tube.
1.
Install Floating Piston tool TL
then thread the tool into the floating piston, then into the
in place so you can properly bleed the shaft assembly and will.
(j)
Remove with 7/16 socket.
Reinstall with Blue Loctite and torque to 120 in/lbs.
Thread tool into floating piston first, then
thread into the body, you are then ready to
fill the body assembly with oil.
Fill body with oil to the first set of threads.
Mustang Strut
12
Once you have your desired piston and shim stack on the shaft assembly and the ring nut is torque, you
are now ready to reassemble the inner tube.
TL-FP-MUSTANG (j) into body. Do this by removing the inflation valve,
then thread the tool into the floating piston, then into the body. This will hold the floating piston
in place so you can properly bleed the shaft assembly and will.
Reinstall with Blue Loctite and torque to 120 in/lbs.
Thread tool into floating piston first, then
thread into the body, you are then ready to
Fill body with oil to the first set of threads.
2011/2012
Once you have your desired piston and shim stack on the shaft assembly and the ring nut is torque, you
Do this by removing the inflation valve,
will hold the floating piston