PowerTap Cervo 2.4 Pro - Manual (Page 18)

INTERVAL MEMORY MODE
To access stored interval data for the previous 9 intervals only:
1) Enter the interval mode hold [MODE] until “INT” appears on the left hand side of the
display.
2) Press [MODE] to scroll until the “INT” flashes. NOTE: INT now constitutes a fourth
level of display.
3) Hold [SELECT] and the memory icon (”M”) appears next to the interval number
(FIGURE 20).
4) With “INT” flashing, press [SELECT] to advance to the interval you wish to view.
5) Press [MODE] scroll the cursor to the line of information you wish to view. NOTE:
Recovery periods as well as work periods are displayed in memory mode.
To exit back out of the interval memory mode hold [SELECT]
until the memory icon disappears. The computer is now dis-
played in the interval mode. To exit from the interval mode
from any location on the display hold [MODE] until “INT” dis-
appears.
heart rate
speed int m
multi
18