PowerTap Cervo 2.4 Pro - Manual (Page 6)

1 Computer
1 Speed Sensor
1 Chest strap
12 Cable ties
1 PowerAgent Software CD
1 Download cable
1 Wheel magnet
1 Cadence Sensor (Cervo 2.4 Pro Only)
1 Instructional DVD
Qty Item
Package Contents
6
System Overview
THE CERVO 2.4 SYSTEM
The Cervo 2.4 system includes a computer and harness which measures speed, dis-
tance, cadence (Pro), and heart rate. This information is transmitted via receiver placed
on the front fort. The receiver transfers the data via a wired signal to a computer
mounted on the handlebar or stem. Heart rate data is transferred via a non-coded
telemetry signal from the chest strap monitor. The data is then integrated to display
current, average, and maximum biometric information.
PREPARING FOR INSTALLATION
The only item needed for installation in a cable cutter to trim excess cable tie. See
TABLE 1 to verify package contents..
UPGRADING TO POWERTAP
The Cervo is the same computer used with the PowerTap SL 2.4 models. Some of the
features on the Cervo will not function without the PowerTap hub and receiver. The
Cervo 2.4 can easily be upgraded to the PowerTap SL 2.4 by contacting your local
dealer or CycleOps directly at 800-783-7257.