PowerTap Cervo 2.4 Pro - Manual (Page 30)

TEST MODE
1) From the computer setup main menu press [SELECT] and scroll until the letter “t” is
flashing. Press [MODE] to enter setup mode.
2) Press [MODE] to scroll through the different test modes as shown by the number.
NOTE: Press and hold [MODE] and [SELECT] simultaneously returns to standard
operation.
0 - Model and version.
Displays the model on the middle line and version number on the bottom line.
1 - LCD Test
Press [SELECT] all the LCD segments are displayed. Press [SELECT] to return to the
normal screen.
2 - Receiver Test Signal
NOTE: The transmission icon is illuminated.
The middle line display flashes “88” with each blip of data from the receiver whether
valid or not.
3 - Heart Rate Signal Test
NOTE: The heart rate signal is illuminated.
The middle line display flashes “88” with each heart rate blip received.
4 - Bike Computer Wheel Magnet Detect
NOTE: The “mi” or “KM” icons are illumined.
The middle line display flashes “88” with each sensing of the wheel magnet next to
the receiver.
30