Alliance Laundry Systems Drying Tumbler Part No. 70400401R2 - Manual (Page 24)

70400401 22 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Before You Call for Service
Customer Service
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized
parts distributor.
For technical assistance, call (920) 748-3121.
Won’t
Start
Won’t
Heat
Clothes
Not Dry
Possible Reason – Corrective Actions
• Insert correct coin(s) or valid card if applicable.
• Close the loading door tightly.
• Close lint panel tightly.
• Press the PUSH TO START or START pad/button.
• Be sure power cord is plugged all the way into the electrical outlet.
• Drying timer is in OFF position.
• Check the main fuse and circuit breaker.
• Check fuses located in the machine.
• Insufficient airflow.
• Gas shut-off valve in OFF position.
• Are controls properly set?
• Broken drive belt. Call the service person.
• • Tumbler is in Cool Down Mode.
• • Lint screen clogged. Clean lint screen.
• • Exhaust duct to outside is blocked. Clean out.