Ridetech 11396799 User Manual
Page 5
It is the final responsibility of the installer and vehicle
driver to insure that the airspring will not rub on
anything at any time! Failure to follow this guideline will
result in immediate failure of the airspring and will NOT be
a warranty situation.
13. Install the airsprings into the upper and lower airspring/shock crossmembers. Be sure to
use the supplied lower plates under the bottom of the airspring to prevent damage to the
airspring when fully deflated.
14. Install shocks into the upper and lower airspring/shock crossmembers using the supplied
shock studs on the bottom and the supplied bolts on top. When properly installed these
shocks will not bottom out under full deflation and will capture the airspring extension under
full inflation. DO NOT USE SUBSTITUTE SHOCKS WITHOUT CAREFULLY CHECKING
THESE DIMENSIONS! Shocks are purchased separately.