Ridetech 11284699 - Manual (Page 2)

*** For use w/ RideTech shock kit ***
1. Apply thread sealant to an
elbow air fitting and screw it into the
top of the air spring.
2. Place the upper air spring
bracket on top of the air spring
clocked so the air fitting access
hole is next to the fitting. Fasten it
to the air spring using two 3/8”
Nylok nuts and flat washers.
3. Screw the 7/16” x 6” all thread
into the nut at the bottom of the
bracket.
4. Place the upper washer on top
of the coil spring pocket.