Rocky Mountain Radar RMR-C435 - Manual (Page 3)

Installation:
1) Complete, sign, and mail Ticket Rebate
Registration card within 30 days from the date of
purchase.
2) Attach the windshield bracket to the RMR-C435
unit. Align the edge on the bracket with the slot
opening on the front of the case. Slide the bracket
gently into the case until it locks into place.
3) Place the windshield bracket in the upper center
portion of the windshield. The ideal position will be
right below the rearview mirror. Press suction cups
firmly against windshield to adhere suction cups.
Note: Tinted glass will degrade the laser
performance.
4) Bend the windshield mount bracket so the unit is
in a level position.
5) The RMR-C435 will hang from the bottom of the
bracket and must have an unobstructed view of the
road ahead.
6) Insert the small end of the power cord gently into
the power jack on the right side of the unit and the
large end into the cigarette lighter receptacle.
Remote mounting is not recommended.
Hard wire: Remove cigarette lighter plug. Connect
the red wire to +12 Volts, and connect the white
wire to ground. If your power cord has a dashed
white stripe then connect this white stripe wire to
ground and solid black wire to +12 Volts.
2