Rocky Mountain Radar RMR-C435 User Manual
Page 5
Reminder! The C435 will memorize the settings
of the features above when the unit is powered
off. Be sure to re-adjust the settings to your
normal preferences.
Test Function: To run the system diagnostics check
on the unit press and hold down both the Dim and
City buttons simultaneously for an extended period
of time (approximately 3 to 5 seconds). The unit will
perform a test sequence to verify all systems are
operating properly. Once the diagnostics test is
completed, the unit will remain with all LEDs lit. To
reset the unit press any button: Dim, Mute, or City.
This test is also performed automatically when the
unit is powered on.
Power and Volume: Power is provided through the
thumb wheel switch on the left side of the unit.
Rotate the wheel forward to turn on and increase the
volume for the alarm.
Rocky Mountain Radar does not condone the use
of excessive speed on the highways, nor does it
endorse breaking the speed limit laws of the
United States of America. Please drive safely
when using this or any other electronic product
in your vehicle.
4