SIGMA MC 1812 MOTO - Manual (Page 11)

Mode 2
Mode 1
Reset
Set
Mode 2
Mode 1
Reset
Set
Mode 2
Mode 1
Reset
Set
Acceleration measurement
Basic settings
www.sigmasport.com MC 1812 Page 11
MC 1812
4 Basic settings
Accessing the basic settings menu:
- Press and hold the
Set button for three seconds.
- ‘Setting OPEN’ appears in the bottom display segment.
- ‘Setting OPEN’ flashes.
- The first menu item appears on the display: ‘Accel.’ and
‘0 - 100’ (default value).
Now press the Mode 1 button to go to the menu item that you want to set or
change.
To exit the basic settings:
- Press and hold the
Set button for three seconds.
- ‘Setting CLOSE’ appears on the display
- ‘Setting CLOSE’ flashes
- The display menu reappears.
WARNING
Do not operate the device while riding. A lack of attention to the other traffic on
the road can lead to accidents with serious material damage, personal injury or
even death. You bear full responsibility for the use of this device.
4.1 Acceleration measurement
1 Press the
Set
button.
2 ‘Target speed’ appears and the indicator ‘100’ (default value) flashes.
3 Press Mode 2 (+) or Reset (-) to set the value you desire (e.g. ‘80’).
4 Press the
Set
button to save your setting.
‘Setting OK’ appears on the display.
Further explanations can be found in section „5.6 Acceleration measurement“.