General mc 1812 functions, 8 braking measurement, 9 drag race/quarter-mile race – SIGMA MC 1812 MOTO User Manual

Page 19

Advertising
background image

Highway acceleration measurement

General MC 1812 functions

www.sigmasport.com

MC 1812

Page 19

MC 1812

5.7 Highway acceleration measurement

The MC 1812 has a highway acceleration measurement function.
This function ‘60...100/sec’ (default value) measures the time (or optionally
the distance – selectable in the basic settings) that the motorcycle needs to
accelerate from a lower to a higher speed.

The measurement starts as soon as the lower speed is exceeded. The
measurement ends as soon as the higher speed is reached. During the
measurement, ‘calc.’ appears on the display. The measurement result is
displayed in the format xx.x sec or optionally in m.

Note

Do not use this function when riding on standard roads, only on special sites (e.g.
motorcyclist training centers).

5.8 Braking measurement

The MC 1812’s braking measurement measures the braking coefficient ‘brake
(m/s²)’ and the braking distance ‘brake dist.’. The measurement is triggered
via a freely configurable minimum deceleration value (see basic settings). The
minimum deceleration is needed to prevent the braking measurement from being
triggered when the rider simply releases the throttle.
During the measurement, ‘calc.’ appears on the display. The measurement result
is displayed in the format xx m/s² for the braking coefficient and in xx m for the
braking distance. The speed range in which the measurement took place is also
displayed.

This provides you with information about your braking behavior so that you can
optimize it.

Note

Do not use this function when riding on standard roads, only on special sites (e.g.
motorcyclist training centers).

5.9 Drag race/quarter-mile race

The MC 1812 has a drag race function. The measurement begins from a
standing start. During the measurement, ‘calc.’ appears on the display. On
reaching a distance of quarter of a mile, the measurement stops and the result is
displayed in the format xx.x sec.

Note

Do not use this function when riding on standard roads, only on special sites (e.g.
motorcyclist training centers).

Advertising