SIGMA PC 4 - Manual (Page 11)

2.3 Training time (start, stop, reset) 2.4 Ending the training
The PC 4 is in sleep mode.
The chest belt is attached. Stop the stopwatch by pressing the
function button and remove the chest strap.
After a short time, the PC 4 will automatically
return to the sleep mode.
Press the function button
to activate the PC 4. The PC 4 is in sleep mode.
Start the stopwatch by pressing the
function button.
Stopwatch begins to run.
Stop the stopwatch by pressing the
function button.
Stopwatch stops running.
The stopwatch can be restarted by
pressing the function button again.
Reset the stopwatch to zero by keeping
the function button pressed down until
"hold“, “RESET“ and then 0:00:00 appears
in the display.
The stopwatch is reset to zero.
W W W. S I G M A S P O R T. C O M
The previous training time can be recalled
by pressing the function button. To delete
the previous training time, see section 2.3.
GB
US
20 21