Telenav for AT&T Supported Devices: v4.1 for Palm Treo 750 - Manual (Page 22)

You can make a choice by selecting an item. Otherwise, press Back to return
to the main menu.
Compass
If you choose Compass, you will see a display similar to a nautical compass.
More correctly, it actually displays course over ground, the direction you are
traveling if you are moving. The screen also provides current latitude,
longitude, and speed. Using the main menu Preferences, you can select the
format of the speed as miles per hour or kilometers per hour.
If no GPS data is available, “No GPS” appears instead of latitude and
longitude.
Press Back to return to the GPS Tools submenu.
Record Location
This menu option allows you to mark and label your current location for future
reference. If you choose Record Location, there will be brief activity to
determine the GPS position, and then you will need to enter a label.
After the location is saved, you will be returned to the GPS Tools menu.
View Locations
This menu option allows you to view a map of the locations that you have saved for future reference. Highlight the
location that you wish to view and select it, there will be brief activity to download the map.
Use the zoom bar on the right to zoom in and out of the map. The default zoom level is set to 4, the zoom level
ranges between 1 and 8. Use the navigation keys to move the location cursor, moving the cursor off the map will
cause the map to pan to that location.
TIP: When viewing the map select the Menu key to look up the location address or select the ‘drive to cursor’
option and begin a new trip to your recorded location.
© TELENAV 2003-6 PAGE 22 OF 29