Tuff Country 43001 - Jeep Wrangler 3 kitt - Manual (Page 7)

33. Remove the hydraulic floor jacks from under the rear differential.
34. Working on the driver side, re-install the stock ABS clip to the bottom of the OE frame rail. Repeat procedure on the
passenger side.
35. Install the tires and wheels and carefully lower the vehicle to the ground.
36. Check and double check to make sure that all steps were performed properly. And then check them again.
Congratulations, installation complete!
Special note: After the completion of the installation, Tuff Country EZ-Ride Suspension recommends taking the
vehicle to an alignment shop and having a proper front end alignment performed.
Tuff Country EZ-Ride Suspension recommends that a complete re-torque is done on all bolts associated with this
suspension system. It is the customers responsibility to make sure that a re-torque is performed on all hardware
associated with this suspension system after the first 100 miles of installation. It is also the customers respon-
sibility to do a complete re-torque after every 3000 miles or after every off road use. Neglect of following these
steps could cause brackets to come loose and cause serious damage to the suspension system and to the vehi-
cle.
This Suspension System comes with (1) installation manual and some post installation procedure literature and
it is the installers responsibility to make sure that the customer receives the post installation procedure litera-
ture. If a customer would like a copy of the installation manual, please have them visit our website at www.tuff-
country.com. Have them go to the customer care section to download these instructions. If you have any ques-
tions, please feel free to call us at (801) 280-2777.
If you have any questions or concerns, please feel free to contact Tuff Country or your local Tuff Country dealer