Anthem TLP 1 - Manual (Page 24)

18
4. REMOTE CONTROL OPERATION
continued …
In the following example, TLP volume is locked onto every Component selection except TV:
To Engage Volume Lock for TLP:
1. Press and hold SETUP until the LED flashes twice.
2. Press 9, 9, 3.
3. Press TLP.
At this point, the Volume and Mute keys now control the TLP 1, no matter which of the four Component
selections the Remote Control is in. However, since this may not be desirable, any individual Component
selection can be unlocked.
To Disengage Volume Lock for TV, and re-engage the TV Volume Control:
4. Press TV.
5. Press and hold SETUP until the LED flashes twice.
6. Press 9, 9, 3.
7. Press VOL .
The Volume and Mute keys now control the TLP 1 for every Component selection except for TV. You may
continue to unlock other Components one at a time. To unlock all Components at once and restore the default
setting, press VOL+ instead of VOL
in step 7.
4.4 TEACHING THE TLP 1 REMOTE CONTROL TO UNIVERSAL LEARNING REMOTES
Some keys on the TLP 1 Remote, such as VOL+, VOL , and SELECT have press and hold commands as well
as regular press and release commands. The ‘press and hold’ command of a key is exactly the same as the
‘press and release’ command of that key, repeated as long as the key is held. It may be necessary to program
your aftermarket remote to loop or repeat a ‘press and release’ command to turn it into a ‘press and hold’
command. The methods of doing this vary with the model – contact the remote control manufacturer for
more information.