Anthem TLP 1 - Manual (Page 9)

2. CONNECTIONS AND LAYOUT
With your TLP 1 in front of you, browse through the illustrations in this section to see several quick system
hookup options. It’s as simple as following the lines in the connection diagrams to and from each component.
2.1 QUICK START GUIDE – Before you start, make sure all components are unplugged.
To connect a CD player, DVD player, TV, VCR, amplifier, and powered subwoofer to the TLP 1:
• CD Player to TLP 1 – see diagram in section 2.3.1
Connect the L/R audio output of the CD player to Analog Audio-In/CD on the TLP 1.
• DVD Player to TLP 1 – see diagram in section 2.3.2
Connect the L/R audio output of the DVD player to Analog Audio-In/DVD on the TLP 1.
• Satellite Receiver to TLP 1 – see diagram in section 2.3.2
Connect the L/R audio output of the receiver to Analog Audio-In/SAT•AUX on the TLP 1.
• TV to TLP 1 – see diagram in section 2.3.3
Connect the L/R audio output of the TV to Analog Audio-In/SAT•AUX on the TLP 1. If you are
using a satellite receiver and your TV does not have audio inputs and outputs, connect the
satellite receiver directly to Analog Audio-In/SAT•AUX on the TLP 1.
• VCR to TLP 1 – see diagram in section 2.3.3
Connect the L/R audio output of the VCR to Analog Audio-In/VCR on the TLP 1.
To Record: Connect Analog Audio-Out/RECORD on the TLP 1 to the L/R audio input of the VCR.
• TLP 1 to Amplifier – see diagrams in sections 2.3.4 and 2.3.5
From the TLP 1, connect Left and Right outputs to the inputs of the power amplifier. Use
FULL RANGE if using full-range speakers either with or without a subwoofer, and HIGH
PASS if using speakers with limited low-frequency response along with a subwoofer.
Follow the amplifier manufacturer’s instructions for connecting the speakers.
• TLP 1 to Powered Subwoofer – see diagrams in sections 2.3.4 and 2.3.5
From the TLP 1, connect Analog Audio-Out/SUBWOOFER to the subwoofer’s line/low level
input. Use FULL RANGE if the subwoofer has a built-in crossover, and LOW PASS if the
subwoofer’s crossover is bypassed or if the subwoofer doesn’t have a crossover.
Reconnect the power to all components and turn them on. To turn on the TLP 1 press the POWER button on
the front panel.
To Listen to a CD:
• Press CD Source on the front panel of the TLP 1.
• Place a CD into the CD player and press play. You should hear music coming from your speakers.
Use the TLP 1 Master Control Knob on the front panel to adjust volume.
To Watch a DVD:
• Press DVD Source on the front panel of the TLP 1.
• Select the TV input that corresponds to the one that the DVD player’s video output is plugged into.
• Place a DVD into the DVD player and press play. You should see the picture on your TV and hear
sound from your speakers. Use the TLP 1 Master Control Knob on the front panel to adjust volume.
3