Anthem D2v 3D - Manual (Page 41)

33
3. SETUP
continued …
Highlighting DVD1 then pressing SELECT displays this menu – the other submenus are similar:
Rename:
The source names that appear on the front panel display and the on-screen display can be changed to
another name, up to six characters long. The following characters are available:
A, B, C....Z, a, b, c....z, blank, dash (–), period (.), slash (/), 0, 1, 2....9, colon (:).
When a source is renamed, the new name appears next to the factory-assigned name in the Source Setup
and Mode Presets root menus and at the top of the renamed source’s submenu.
Example: Rename “AUX” to “GAME”.
• Enter the setup menu. Go to SOURCE SETUP and press SELECT.
• Press the 6 button until you reach AUX and press SELECT.
• RENAME: AUX will be highlighted in red.
• Press SELECT. The first character “A” will be highlighted in red.
• Use the Master Control Knob or the 56 buttons to change characters. Change the first one to “G”.
• Press the 4 button to move to the next character. Change it to “A”.
• Use the 34 buttons to move to each remaining character. Change to “M” and “E”.
• Press BACK to leave the submenu and return to the main menu.
Video Output Configuration (MAIN only):
Choose between configurations 1 to 4 as set in the VIDEO OUTPUT menu, Through, or Last Used. When Last
Used is selected, the video configuration is the one that the previous source was using.
Through is required for 3D material but can also be used for 2D sources to bypass video processing. When
engaged, there is no on-sreen status overlay because it requires video processing which is the opposite of
a passthrough. Since the output resolution and frame rate is the same as the source’s in Through mode,
ensure that your display can play the source – not all dispays accept interlaced, 1080p, or 24 frame per
second sources. Also note that when using Through mode, HDMI-OUT 2 is inactive.
6f. DVD1 SOURCE SETUP
a. RENAME: DVD1
b. VID OUT CNFG: 1
c. SCALER INPUT: HDMI1
d. COMPONENT IN: 1
e.
S-VIDEO IN: DVD
f. COMPOSITE IN: DVD
g. AUDIO IN: Dig HDMI
h. AUTO DIG: No
i. ANLG AUD: NA
j.
MUTING: Med
k.EQ LF +0.0dB HF +0.0dB
l.
BASS MANAGER: Movie
m. ARC ROOM EQ: On
n. DOLBY VOLUME: Off
o.DOLBY VOL LEVEL: NA
p.
HALF MODE: NA
q. LIP-SYNC: 0.0 ms