Anthem LTX 300 - Manual (Page 24)

3 Basic Operation
24
Projecting Image
This section describes the basic operations to project input images on the screen.
Preparation
1
Insert the power plug to the power
outlet
2
Turn on the power
●
You can also press the button on the unit to turn on the power.
( P15)
●
The lens cover will be opened.
3
Project the image
1 Select input mode
●
You can also select the input mode by pressing the
INPUT INPUT
button on the
unit. ( P15)
2 Play back the selected device
4
Adjust the position of the projection
screen
●
See Installing the Projector and Screen ( P22) and Lens
Control ( P36 - 21 ) for the adjustment method.
5
Adjust the image size (zoom) and the
focus
1 Adjust the focus
WARNING WARNING
LAMP LAMP
ST ST ANDBY/ON ANDBY/ON
① Connect to this unit
② Connect to the power outlet
Light on (Green)
Adjust accordingly by pressing
the up/down buttons
Power Cord
(Supplied)
Light on (Red)
ON ON
BACK
Back
Operate
Select
Exit MENU
Focus
Lens Control
①
②
STANDBY/ON
STANDBY/ON
HDMI 1 HDMI 2 ޓ COMP㧚 Video S-Video
LENS LENS
INPUT INPUT