Mounting the interface cable adapter module – DAVIS Interface Cable Adapter Module User Manual
Page 3
Advertising
Mounting the Interface Cable Adapter Module
Page 3
M
OUNTING
THE
I
NTERFACE
C
ABLE
A
DAPTER
M
ODULE
You may mount the ICAM against a wall or other vertical surface or you may
simply set it down on a horizontal surface.
1. Before installing, consult your system installation manual for instructions on labeling
cables.
2. Remove the cover from the ICAM by pushing down on the tabs at the top until you can
remove the tabs from the slots.
R
EMOVING
THE
C
OVER
Advertising