DAVIS DriveRight 600E GPS Wireless Interface Module Manual (8127, 28, 29, 8251) - Manual (Page 3)

1
GPS/Wireless System
Installation Manual
This manual provides the instructions necessary to install the GPS Module
(# 8128), and the Wireless On-Board Module (# 8129) with your DriveRight
®
600 E device using the DriveRight GPS/Wireless Interface Module
(# 8127) or with your CarChip
®
Fleet Pro using the CarChip Fleet Pro GPS/
Wireless Interface Module (# 8251).
The DriveRight GPS/Wireless Interface Module (# 8127) connects the GPS
and/or Wireless On-Board Modules to a DriveRight 600
E device. The CarChip
Fleet Pro GPS/Wireless Interface Module (# 8251) connects the GPS and/or
Wireless On-Board Modules to a CarChip Fleet Pro.
Refer to the DriveRight 600 E User’s Guide, or CarChip Fleet Pro User’s
Guide, and the DriveRight Fleet Management Software Online Help for more
information on configuring and using these components.
Note: GPS data collection must be enabled in the DriveRight or CarChip device prior to
installation in the vehicle via the DriveRight Fleet Management Software (FMS).
The Wireless On-Board Module must be configured in the Fleet Management Software
(FMS) before installation in a vehicle.
See the FMS Online Help System for information on configuring both of these modules.
The components necessary for a GPS/Wireless System installation in a vehicle
differ based on the monitoring device with which the components are paired.
* Requires one # 8127 GPS/Wireless Interface Module (for DriveRight installations)
or one # 8251 f(or CarChip Fleet Pro installation) per vehicle.
Device
GPS/Wireless
Interface Device
GPS Device Wireless Device
DriveRight 600 E
# 8126
DriveRight GPS/
Wireless Interface
Module # 8127 *
GPS Module
# 8128
Wireless On-Board
Module # 8129
CarChip Fleet Pro
# 8246
CarChip GPS/
Wireless Interface
Module # 8251 *
GPS Module
# 8128
Wireless On-Board
Module # 8129