DAVIS DriveRight 600E GPS Wireless Interface Module Manual (8127, 28, 29, 8251) - Manual (Page 8)

6
CarChip GPS/Wireless Wiring Diagrams
CarChip GPS/Wireless Wiring Diagrams
Wiring the GPS Wireless System to a CarChip Fleet Pro
Making Connections
The GPS/Wireless Interface Module for CarChip Fleet Pro can be installed
with either the GPS Module, the Wireless On-Board Module or both. The
instructions below assume an installation involving all three modules.
Modify your own installation as necessary.
1. Connect the GPS Module to the GPS/Wireless Interface Module by
plugging the male connector of the GPS Module cable into the socket
labeled “GPS” on the GPS/Wireless Interface Module.
2. Connect the Wireless On-Board Module to the GPS/Wireless Interface
Module by plugging the male connector on the Wireless On-Board Module
cable into the socket labeled “W” on the GPS/Wireless Interface Module.
3. Connect the GPS/Wireless Interface module to CarChip Fleet Pro by plug-
ging the male connector on the Module cable into the connector on the top
of the CarChip Fleet Pro.
W GPS
GPS\
Wireless
Interface
Module
# 8251
GPS
Module
# 8128
CarChip Fleet Pro
# 8246
Wireless
On-Board
Module
# 8129