Alpine CDA-9830 - Manual (Page 25)

23
-EN
i-Personalize™
Operation (CDA-9831 only)
About i-Personalize™
You can download data (from Alpine’s website) to a CD-R and
download and store the data to the CDA-9831.
To start i-Personalize, access the URL below and follow the on-screen
instructions.
http://www.alpine.com or http://www.alpine-usa.com
Downloadable data
The file name of download data shall be
“A_W*****.MP3.”
A_W ∗∗∗∗∗.MP3
Extender (fixed)
Identifier (alphabet or number 5
letters maximum)
Header (fixed)
You can create a file name via the website. Do not change a
file name once it has been created. Malfunction may result.
• For details about procedures of download, see ALPINE’s Web site.
• If the HDA-5460 model is connected to this unit, the HDA-5460
hard disc can be used. Data that has been stored in the hard disc is
downloaded by the “Data Downloading” operation to CDA-9831.
For details on how to download data to the hard disc, refer to the
Owner’s Manual of the HDA-5460 model.
• If an external audio processor is connected, data that is
downloaded cannot be used.
Data Downloading
1
Insert the CD-R disc containing the data.
If the source is not the CD mode, press SOURCE/
POWER to change to CD mode.
2
Press MENU to select the Download mode.
3
Press g or f to select “YES.”
Data search of the disc starts and the first file name is
displayed.
• Selecting “NO” and pressing MENU will cancel the download
mode.
• If a file is not found by the data search, “No File” is indicated.
• The “No File” display will automatically disappear if no operation
is performed for 5 seconds.
4
Turn the Rotary encoder to select files that are
downloaded and then press the Rotary encoder
to start.
Data downloading starts.
If the MENU is pressed while downloading, download is
canceled.
5
When data download is finished successfully, the
confirmation screen of each item is displayed for 2
seconds.
Successfully downloaded items are indicated as checked
boxes on the confirmation screen.
PARAMETRIC EQ data
The data is memorized in Preset 2 of Parametric EQ mode.
The memorized data settings in Preset 2 (Parametric EQ
mode) are automatically applied.
HPF/LPF (Cross over) data
The data is memorized in Preset 2 of HPF/LPF mode. The
memorized data settings in Preset 2 (HPF/LPF mode) are
automatically applied.
TIME CORRECTION data
The data is memorized in Preset 2 of the Time correction
mode. The memorized data settings in Preset 2 (Time
Correction mode) are automatically applied.
6
Press MENU to select RETURN.
The display returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• When you download the data again, the data is overwritten in
Preset.
Rotary encoder
SOURCE/
POWER
Data is memorized in Preset 2 of the
Parametric EQ mode.
Data is memorized in Preset 2 of the
Time Correction mode.
Data is memorized in Preset 2 of the
crossover mode.
Parametric
equalizer
Time correction
Crossover
g f MENU