Alpine CDA-9830 - Manual (Page 26)

24
-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
1
Press MENU to select the SETUP mode.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
(e.g. Select BEEP)
CDA-9831
CLOCK* 1 ↔ TUNER MODE ↔ DIMMER ↔ SUBWOOFER ↔
PLAY MODE ↔ BEEP ↔ TEXT SCROLL ↔ INT MUTE ↔ INT
AUDIO ↔ AUX IN ↔ (AUX NAME)* 2 ↔ POWER-IC ↔ LCD
CONTRAST ↔ TUNER AREA* 3 ↔ A-LINK TEMP* 4 ↔ DEMO
↔ CLOCK* 1
CDA-9830
CLOCK* 1 ↔ NORMAL/HI-FI/STABLE ↔ SUBW ↔ CD-DA/
CDDA/MP3 ↔ BEEP ↔ SCR ↔ MUTE ↔ INT ↔ AUX ↔ (AUX
NAME)* 2 ↔ PWR ↔ AREA ↔ DEMO ↔ CLOCK* 1
* 1 Refer to the “Setting Time” section (page 6).
* 2 Displayed only when AUX is ON.
* 3 Refer to the “Radio” section (page 8)
* 4 Displayed only when an external amplifier is connected.
3
Turn the Rotary encoder to change the setting.
(e.g. Select BEEP ON or BEEP OFF.)
4
Press MENU to select RETURN.
The display returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• For the XM Radio settings, refer to “XM Radio (Optional)” (page
26), and for the MobileHub™Link settings, refer to
“MobileHub™Link Operation (Optional)” (page 28).
• If no operation is performed within 15 seconds, the display returns
to normal mode.
Sound Customizing
Switching the Tuner Mode
TUNER MODE NORMAL (Initial setting) / HI-FI / STABLE
This unit incorporates the MAX TUNE SQ for the highest quality
tuner audio. Moreover, you can choose between three settings to suit
your own personal sound preferences and usage.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
• If you find the sound is very noisy while listening to the tuner in Hi-
Fi mode, we recommend you change to Normal mode.
Subwoofer On and Off
SUBWOOFER ON (Initial setting) / SUBWOOFER OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output phase and level.
1 Press the Rotary encoder repeatedly to select the
SUBW mode.
SUBW → BALANCE → FADER → DEFEAT → VOLUME →
SUBW
2 Press g or f.
The subwoofer output phase is toggled SUBW
NORMAL (0°) or SUBW REVERS (180°).
To adjust the level, turn the Rotary encoder.
Sound (Beep) Guide Function
BEEP ON (Initial setting) / BEEP OFF
This function will give audible feedback with varying tones
depending upon the button pressed.
Visual Customizing
Dimmer Control (CDA-9831 only)
DIMMER AUTO (Initial setting) / DIMMER MANUAL
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's backlighting is too bright at night.
Scroll Setting
TEXT SCROLL AUTO / TEXT SCROLL MANUAL (Initial setting)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
SCROLL AUTO : The CD text information, the text information
of folder and file names, and the tags are scrolled
automatically.
SCROLL MANUAL : The display is scrolled when a disc is
loaded or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display. The disc titles input manually (page 20) cannot be
scrolled.
f g
BAND/
TEL.
MENU
Rotary encoder
SOURCE/
POWER