Aiwa XR-X77 - Manual (Page 5)

5
En
PARTS AND CONTROLS
Main unit
1 2 3
7 6 5
4
4 z OPEN/CLOSE
Opens or closes the disc compartment.
5 s
CLEAR
CD: stops playback.
Radio: clears a preset station.
f / r , t / g (TUNING - , + )
CD: skips to a previous or a succeeding track when
pressed, searches a track in fast forward or reverse
playback when held down.
Radio: manually tunes up or down within the band.
PRESET
Tune in a preset station.
6 VOLUME
Adjusts the volume.
7 PHONES jack
Plug in optional headphones set with a stereo mini plug
(ø3.5 mm,
1 /
8
in.). Speaker output is canceled.
1 POWER 6 STANDBY/ON
Switches the unit on and off (standby).
2
TUNER/BAND
Selects Radio function and the radio band.
AUX
Selects the function of external equipment connected to
VIDEO/AUX IN jacks.
E CD
Starts and pauses play.
3 ECO/DIMMER
Selects ECO mode and dimmer mode.
DISPLAY
Changes the display in CD playback mode.
TONE
Selects the sound adjusting mode, "BAS" (bass),
"MID" (middle range) or "TRE" (treble).
SET
Determines the mode.
Stores the received station to preset.
! @
9 0 8
# $
8 DIGITAL OUT (OPTICAL) jack
CD digital sound signals can be output through this jack.
Use an optical cable to connect digital audio equipment.
Remove the dust cap from the DIGITAL OUT (OPTICAL)
jack. Then connect an optical cable plug to the DIGITAL
OUT (OPTICAL) jack.
9 AM LOOP jack and FM 75
Ω
terminal
Plug in the supplied AM and FM antennas.
0 SPEAKERS 3 terminals
Connect the supplied speaker cords.
! AC power cord
@ VIDEO/AUX IN jacks
Accept analog sound signals from external equipment.
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to R jack, white
plug to L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press AUX.
To change a source name in the display of the
AUX function
Hold down AUX and press POWER while the power is
on.
AUX VIDEO TV
#
LINE OUT jacks
Analog sound signals for all functions can be output
through these jacks. Use a cable with RCA phono plugs
to connect audio equipment.
Signals input through the VIDEO/AUX IN jacks are not
output from the LINE OUT jacks.
$ 3 SUB WOOFER jack
Connect an optional sub woofer with a built-in amplifier
to the jack.