Aiwa XR-X77 - Manual (Page 7)

7
En
ADJUSTMENTS BEFORE OPERATION
Power
Turning the unit on
Press POWER 6 STANDBY/ON (POWER on the remote
control).
Alternatively, press TUNER/BAND, AUX or CD. Playback will
start automatically if a disc is loaded.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
POWER
6 STANDBY/ON
POWER
SET f , g
f , g
SET
ECO/DIMMER
TUNER/BAND, AUX, CD
CD,AUX
TUNER/BAND
Dimmer
The display window brightness can be adjusted to the following
four levels: "
D I M O F F ", " D I M M E R 1 ",
" DIMMER 2 ", and " DIMMER 3 ".
" DIM OFF " is the brightest level.
When " DIMMER 3 " is selected, the display is darkest.
1 Press ECO/DIMMER twice while the unit is turned
on.
"DIM MODE" is displayed.
2 Within 6 seconds, press SET.
The currently selected brightness is displayed.
3 Within 6 seconds, press f or g to select
the desired brightness.
4 Within 6 seconds, press SET.
ECO mode
Reduces power consumption in standby mode with the following
operations.
Press ECO/DIMMER while the power is off (standby).
Each press of the button changes the mode as follows;
ECO ON: Power economizing mode is activated.
When the unit turns off, everything on the display clears and
only the red indicator on POWER lights to show that the power
is being supplied.
ECO OFF: Power economizing mode is canceled.
When the unit turns off, the clock display appears.
•Initial mode is ECO OFF.
When operating while the power is on
1 Press ECO/DIMMER once and press SET.
2 Within 6 seconds, press f or g to select
the desired mode and press SET.
Standby power consumption
ECO ON: 0.6 W
ECO OFF: 13 W