Monoprice 6815 Graphic Drawing Tablet - Manual (Page 7)

I. General Information
1-4
The green LED light on the Wireless tablet is the main indicator for hardware operation
and depending on your pen Wireless tablet model may be located at a different place that
shown in the above diagram. This LED normally stays off, and will only turn it on or off in
response to various conditions. Watch the state of the LED on the Wireless tablet as you
go through these test steps:
1. Tap on any surface with the tip of the pen, or press the left button of the mouse, to “wake it
up” if it has gone into standby mode. A built-in power saving function may have forced the pen
or mouse into the standby mode if either of them is not used for a period of time.
2. As soon as the pen Wireless tablet itself activates, the LED will be light briefly, and will then
go and stay off again.
3. When the Wireless tablet detects the presence of the digital pen or mouse, the LED will be
blinked slowly. This happens either when pen tip is hovering or placing within the working
area which above the Wireless tablet.
4. When you press a button on the pen barrel, or click on a mouse button, the LED will be
lighted up.
5. Hovering and moving the pen or the mouse in the working area will cause the cursor on the
screen to move accordingly.
★ ★ ★ ★ Note: After the Wireless tablet’s (Media Wireless Tablet) device driver has been
properly installed, a small tablet icon ( ) will appear in the system tray, which is
normally at the lower right corner of the screen.
7. Usage Tips
7.1 Wake up the digital mouse from the standby mode
If the digital mouse does not react after you do not use it for a while, press the left button to “wake” it up from
the standby mode.
★ ★ ★ ★
Wireless Tablet (Media Wireless Tablet) can’t support digital mouse 。 。 。 。
7.2 Tapping before you use the digital pen
Before you use the digital pen, or after not using it for several minutes, tap the pen on any surface of the
tablet to “wake” it up from the standby mode.
7.3 Double tapping
When you double tap with the digital pen (equivalent to a double click with a mouse), try to keep the pen tip
away from the tablet’s surface, or at least try to lift the pen tip as fast as possible before the second tap.
7.4 Storing the digital pen
To store the pen, make sure the pen tip does not touch anything, and especially do not let the pen stand in a
cup or penholder with the tip down. Even though the possibility is low, press the pen tip will still cause a
constant drain on the pen’s battery. Place the pen in a penholder, or turn the pen tip pointing upward or
horizontally with the pen tip free of any pressure by other objects.
7.5 Scrolling function of digital pen
The digital pen has the same function of the normal mouse for scrolling pages. Please press the first button
of the digital pen (same function as mouse’s middle click) over the tablet’s working area.
7.6 Using a pen without an ordinary mouse
You may install the digital pen, digital mouse, and normal mouse in your computer at the same time and you
can also remove them to different computer as well. However, only one device is able to work in the
meantime.
★ ★ ★ ★ Please do not use more than two devices at the same time in case the screen cursor is jittering or not
moving.
★ ★ ★ ★ Wireless Tablet (Media Wireless Tablet) can’t support digital mouse 。 。 。 。
8.Wireless Tablet (Media Wireless Tablet) introduction
The Wireless Tablet is the first of its kind to introduce wireless data transfer, providing a thoughtful design and a
maximum working range of 5 meters.The Wireless Tablet is a 2.4GHz wireless solution with multiple channels
and automatic channel skipping and assignment.The USB Dongles on both the tablet and PC can communicate
bidirectionally, meaning every bit of data that is sent or received is verified to ensure data transfer integrity.Even
when there are multiple users, it will be free from channel interference.