Monoprice PID 8048 HT3D-110 - Manual (Page 2)

2
CONNECTION ILLUSTRATION
※ 3D Source Device: Digital TV STB, Satellite Receiver, Digital CATV Receiver, Media Player, 3D Blue-ray Player,
Game Console.
CONNECTION & OPERATION
Connection
Step 1: Connect the HDMI
®
cables from the sources devices to the input ports of the 3D Creator.
Step 2: Connect the HDMI cable from your HDTV (or projector) to the output port of the 3D Creator.
Step 3: Connect the DC 5V/1A power adaptor to the 3D Creator.
Step 4: Finish the connection. The power indication LED (red) will be lighted on.
Operation

Mode 1: 3D Program to 2DTV
 When you want to watch 3D program on the 2DTV, please choose this mode (use
either remote or
“Select” key on the main unit to switch modes)
 Use Red/Cyan glasses to watch
 Supporting 3D format (Input): Side-by-Side (Half)
 Output 3D format: 3D Red/Cyan
 Mode 2: 3D Program to 3D-DLP
 When want to watch 3D program on the 3D Ready DLP projector, please choose
this mode (use either remote or “Select” key on the main unit to switch modes)
 Use DLP shutter glasses
 Supporting 3D format (Input): Side-by-Side (Half)
 Output 3D format: 3D Frame Sequential