Monoprice PID 8048 HT3D-110 - Manual (Page 3)

3
 Mode 3: 2D Program to 2DTV
 When you want to convert 2D program into 3D and via 2DTV to watch, please
choose this mode (use either remote or
“Select” key on the main unit to switch
modes)
 Use Red/Cyan glasses to watch
 You may adjust the level of 3D effect to fit your requirement
 Output 3D format: 3D Red/Cyan
 Mode 4: 2D Program to 3DTV

When you want to convert 2D program into 3D and via 3DTV to watch, please
choose this mode (use either remote or
“Select” key on the main unit to switch
modes)
 Use 3DTV shutter glasses
 You may adjust the level of 3D effect to fit your requirement

Output 3D format: 3D Side-by-Side (Half)
 Mode 5: 2D Program to 3D-DLP

When you want to convert 2D program into 3D and via 3D Ready DLP projector
to watch, please choose this mode (use either remote or
“Select” key on the main
unit to switch modes)
 Use DLP shutter glasses
 Supporting 3D format (Input): Side-by-Side (Half)
 Output 3D format: 3D Frame Sequential
IR Remote Operation
 “PT” button
Pass Through function. When press on this button, the 3D Creator will
pass through the original videos format.
 3D Conversion
1.
“Red/Cyan” button: 3D Program to 2DTV. When press this button,
the 3D Creator will convert 3D program into Red/Cyan 3D format for
2DTV usage.
2.
“DLP” button: 3D Program to 3D-DLP. When press this button, the
3D Creator will convert 3D program into appropriate 3D format for
3D-DLP projector usage.
 2D Conversion
1. “Red/Cyan” button: 2D Program to 2DTV. When press this button,
the 3D Creator will convert 2D program into Red/Cyan 3D format for
2DTV usage.
2. “SBS-H” button: 2D Program to 3DTV. When press this button, the
3D Creator will convert 2D program into Side-by-Side (Half) 3D
format for 3DTV usage.
3.
“DLP” button: 2D Program to 3D-DLP. When press this button, the
3D Creator will convert 2D program into appropriate 3D format for
3D-DLP projector usage.
 “Level” button
1. In the 2D Conversion, users can press “Level” button to adjust 3D
effect level.
2. There are three levels for users to select