Monoprice PID 8048 HT3D-110 - Manual (Page 5)

5
1. Users can play either 2D or 3D programs via source devices to 3D Creator
2. 3D Creator will automatically convert programs into 3D Red/Cyan format
3. Users wear Red/Cyan glasses to watch 3D-effect videos on the 2DTV
NOTE: - 3D Creator does not have de-interlace function, please set the output signal of
source devices to 1080p, 720p, or 480p.
- When converting 3D programs, please make sure the original 3D program is
side-by-side format.
3DTV Application (Mode 4)
1. Play 2D programs via source devices to 3D Creator
2. 3D Creator will convert 2D programs into Side-by-Side (Half) 3D Programs in real time
3. Users wear shutter glasses to watch 3D-effect videos on the 3DTV
NOTE: After converting, you may see two images (side-by-side) on the TV. You need to use TV
remote control to select input 3D format (please refer to TV
’s manual), to make two
images into one image.
3D-Ready DLP Projector Application (Mode 2 & 5)
1. Play 2D or 3D programs via source device to 3D Creator
2. 3D Creator will convert programs into 3D Frame Sequential format for DLP Projector usage
3. Users wear shutter glasses to watch 3D-effect videos via 3D-Ready DLP projector
NOTE: - 3D Creator does not have de-interlace function, please set the output signal of
source devices to 1080p, 720p, or 480p.
- When converting 3D programs, please make sure the original 3D program is
side-by-side format.