Sd-c, Ard settings, Sd-card settings – Monoprice 9206 Pan/Tilt/Zoom IP Camera User Manual

Page 33

Advertising
background image

Pan/Tilt IP Camera

3.11. SD-Card

settings

The IP camera provides the recording of the video files into a standard Micro

SD-Card. Since this recording is directly to the SD-Card, there is no network packets

loss problem when recording to remote device through internet.

Notice : when the IP camera is doing SD-Card recording, this is counted as one

video user. Please refer to appendix B about allowed maximum video users.

1. If the “Always Recording” is selected, the system will start to record to the

SD-Card immediately and keep recording always. If the “Schedule Recording” is

selected, the system will do the SD-Card recording according to the “scheduling”

in section 3.12. “Disable Recording” will disable this SD-Card recording.

2. When doing the SD-Card recording, the system will check the free disk space of

the SD-Card. If the disk space is full (no free disk space), the system will do

“Circular recording”( overwrite the oldest recorded files in the SD-Card ) or “Stop

recording” as selected.

3. SD-Card status – the SD-Card inserted or removed status is displayed here.

4. SD-Card files – as shown in fig.3-14, all the recorded video files with information

including file name and recorded time are listed in this page under the directory of

each date. The recorded file could be separately downloaded or deleted on this

page.

Figure 3-16: SD-Card Settings page

33

Advertising