Monoprice 9206 Pan/Tilt/Zoom IP Camera - Manual (Page 43)

Pan/Tilt IP Camera
3.18. Safe Mode
If by some abnormal operation, for example, powered off during the critical point
of the upgrade procedure, the IP CAM will enter into the safe mode. In this mode, you
will see the following “Safe mode” page when login into this IP CAM. Please do the
upgrade operation immediately to recover the system. On this safe mode, the IP CAM
can not display the video on the CamView software, but you can still find this IP CAM
on the “Auto search” list.
The steps to recover from “safe mode” are the followings :
1. Use CamView to locate the IP CAM by clicking the “Auto Search” item on the
CamView software.
2. Login into the web configuration page of the IP CAM.
3. Upgrade the firmware from the “Upgrade” page.
Figure 3-26: Safe mode information page
43