Monoprice 9207 IP Camera Converter - Manual (Page 14)

MPEG-4 Video Server
3.2. Video Display
This display page allows you to view the video display of the video server
product. For the first time use of this display on a computer, an activeX component
will be automatically downloaded into the browser. This could take some time,
depends on the internet speed. The component is downloaded from a public domain,
so that the computer must be connected to the Internet.
If you want to modify the video display screen size, please refer to section 3.5
for more details.
Figure 3-4: Video display page
When the RS485 function is enabled, the display page will show the PTZ control
functions, as shown in Figure 3-5. Besides the pan/tilt/zoom/focus buttons, there are
some more control functions :
1. Control by CamView – enable/disable the PTZ control function of the video server
by CamView software.
2. Moving speed – the is to control the pan/tilt speed. Larger number means higher
speed.
3. Go to preset – move to the pre-defined preset position.
4. Add preset – move the speed dome to the desired position, including pan/tilt
position and zoom size, giving this position a name, and then press the “add”
button to add this position as a preset point. There are totally 48 preset points
allowed.
14