Monoprice 9207 IP Camera Converter - Manual (Page 49)

MPEG-4 Video Server
Appendix E. 3GPP/ISMA operation
3GPP/ISMA is using RTSP protocol for 3G mobile phone to display the video
stream from some network devices, including video server product. The video server
support the RTSP protocol and video/audio codec needed by 3GPP/ISMA. Users only
need to access the address rtsp://ip_cam_address/CAM_ID.password on the 3G
mobile phone to access the video of the video server product. No other extra
configuration is needed on the video server product. Where ip_cam_address is the
public IP address of the video server product. CAM_ID is the unique Camera ID of the
specific video server product. Password is the video play password of the specific
video server product(detailed in section 3.5). Different 3G mobile phone may need
different operation to be able to key in the rtsp address, please contact the 3G mobile
phone customer service for more details.
The video quality and resolution is the same value as set on the “video settings”
page. Since the bandwidth provided by the 3G service is under 256k bps, better to
configure the “Internet speed” of the video server product to 128k or 64k bps.
Notice 1: when the audio microphone is enabled on the video server product, if
the “Internet speed” in “video settings” page is bigger than 256k or the resolution is
640x480, the audio will be disabled for 3GPP/ISMA access. In all other cases, the 3G
mobile phone will be able to hear the audio from the video server product.
Notice 2 : when the audio microphone is enabled on the video server product, if
there is any 3G mobile access to the video server product( the mobile will hear the
audio ), in this same time, there will be no audio on the CamView playing window for
this video server product.
For more information about operation on different 3G mobile phones, please
contact us for detailed document.
For iPhone users please download software mCamView from App Store.
49