Monoprice 9207 IP Camera Converter - Manual (Page 21)

MPEG-4 Video Server
3.6. 3GPP/RTSP settings
The video server product is able to be viewed from a 3G mobile phone, for
detailed settings on the 3G mobile phone, please refer to Appendix E.
Users can disable the 3G mobile access ability in this page. After the
3GPP/RTSP feature is disabled, no 3G mobile phone is allowed to access the video
of the video server product. When this is disabled, the rtsp stream with MPEG2 audio
is still working, please refer to Appendix F for more details about rtsp stream with
MPEG2 audio.
When the 3GPP is enabled, the video frame rate, resolution and bandwidth for
3G mobile access could be set independently from the video settings for
CamView(PC) access. The maximum allowed resolution is 352x255 and maximum
allowed bandwidth is 256 kbps. When the audio is enabled for both 3GPP and
CamView(PC) and the video/audio is displayed in CamView, the audio will be
disabled in 3G mobile display.
The “Access URL” line is the url address for 3G mobile phone to input for seeing
the video of the video server product. Different 3G mobile may need to input this url in
different way, detailed information could be found in the user manual of different 3G
mobiles. Please be noticed that usually public IP address is needed for the video
server product, so that the 3G mobile could access the video server product’s video.
The default setting is “Enable 3GPP/RTSP”.
Figure 3-11: 3GPP/RTSP enabled page
21