Outback Power Systems VFX Series International Programming Manual - Manual (Page 17)

16
GENERATOR MENU
OutBack FX and VFX Inverter/Chargers are programmed to use an AC generator as their default source
of AC input. The CHARGER GEN screens allow a user to adjust the input voltage window and time
delay of the AC input.
From the ADVANCED screen, press .
Press .
Press to adjust the AC input set points
and operation.
The gen input connect delay is the time period be-
tween the FX’s recognizing an acceptable genera-
tor source of AC and connecting that source to
AC loads. This delay allows the generator to warm
up and has a range between 0.2 minutes and 15
minutes which are adjusted with and
. . Press to view the next GEN
screen.
ADV
choose device:
FX CC DC MATE
ADV/FX/PAGE 1-----------------
choose category:
ADV INV CHGR PG2
ADV/FX/PAGE 2-----------------
choose category:
PG1 GRID GEN PG3
ADV/FX/GEN---------------P00
gen input 0.5 min
connect delay
DOWN INC DEC PORT
FX
PG2
GEN
DEC
INC
DOWN