Pure Chronos iDock Series 2 - Manual (Page 14)

10
Setting bass and treble
To adjust the bass and treble output of your Chronos iDock, press
Menu, then scroll and select Audio. Select either Bass or Treble
and use the Navigation dial to adjust from -3 to +3 and push to
confirm.
Setting backlight options
To adjust screen backlight of your Chronos iDock, press Menu, then
scroll and select Backlight.
The backlight menu has two options:
Timeout: Set the length of time that the backlight remains on after a
button press, from always on (On) up to 180 seconds.
Level: Set the brightness level of the backlight, from 1-5 or Auto
(default). In Auto mode the backlight will be adjusted by the light
sensor on your radio.
Checking the software version and updating
To check the software version of your Chronos iDock, press Menu
then scroll to and select SW version. This will display the current
version on screen. Press any button to exit.
Software upgrades may be issued to provide enhanced functions
or improve performance. To upgrade, press Menu, then scroll and
select Software Upgrade and follow the instructions provided with
the upgrade software. Register your product and include an e-mail
address to receive notification of upgrades or visit our website at
http://support.pure.com.
Note: USB upgrade requires a PC running Windows XP/Vista and a suitable USB cable (not
included).
Setting the clock
Your Chronos iDock will set its clock using a digital radio or FM signal. If these are not available,
it is possible to set the clock manually by selecting ‘Clock’ from the menu at any time. Choose
12 or 24 hour clock, set the date and select a date format: day-month-year or month-day-year.
Using the PowerPort
Your Chronos iDock features a PowerPort, which is able to power standard USB
devices such as fans and mobile phone chargers.
Note: PowerPort does not support USB hubs.
Bass
+2
Timeout
45 sec
Level
Auto
SW Version
V1.0.0.2
Additional settings and features
PowerPort