Pure Chronos iDock Series 2 - Manual (Page 9)

5
Selecting your source
Press the Source button and repeat to change the audio source: DAB/FM/iPod/Auxiliary.
Listening to digital radio
Changing stations
1. Press Stations and use the Navigation dial to browse through
the list of available stations.
2. Push the Navigation dial to tune in.
Changing the information shown on-screen
Chronos iDock can display different information relating to the digital radio station you are
listening to.
To change the information shown:
1. Press Menu and select Display.
2. Use the Navigation dial to cycle through the following options
and push to select one:
Scrolling text: Scrolling information broadcast by the station.
Signal strength: A bar indicating the current digital radio signal
strength.
Signal quality: The quality of the signal received.
Date: The current date.
Note: If the message on screen says ‘No stations available’, digital reception is not strong
enough to receive any stations. Check that your aerial is fully uncoiled and use Autotune
(below) to search for stations. Try adjusting your aerial and radio position.
Using Autotune
If you lose a station signal, or wish to update your station list, you can perform an Autotune to
retune all digital radio stations. Press the Menu button, then scroll to and select Autotune. Push
the Navigation dial to confirm.
Radio 2
Jazz radio
Jazz radio
Your jazz favour