Sandvik Coromant Machining carbon fibre materials - Manual (Page 47)

Application example
Surface machining of carbon fibre
Facts and demands: •
- Primary structure carbon fibre
- Minimal splintering of fibres and delamination
- Good surface finish and dimensions
Solutions •
- CoroMill Century with PCD inserts
- Cutter: R590-04C3-11M
- Inserts: R590-1105H-PS2-NL CD10
Cutting data •
- Cutting speed: 300m/min
- Fz: Roughing: 0.16 / Finishing: 0.1mm/tooth
- Ap: Roughing: 2.5mm / Finishing: 0.5mm
CoroMill Century
SANDVIK COROMANT USER’S GUIDE - COMPOSITE SOLUTIONS 47