Sandvik Coromant Machining carbon fibre materials - Manual (Page 48)

Application example
Edging of carbon fibre
Facts and demands: •
- Carbon fibre skin
- Minimal splintering
- Good surface: Ra value of 1.25 μm
Solutions •
- CoroMill Plura engineered solutions
- 1: Diamond coated carbide cutter
- 2: PCD brazed cutter
- Cutter diameter 10mm with 2 cutting edges
Cutting data •
- Speed: 10.000 rpm, tabel feed: 3200mm/min
- Fz: Roughing: 0.03 – 0.08mm/tooth
- Fz: Finishing: 0.02 – 0.04mm/tooth
CoroMill Plura
SANDVIK COROMANT USER’S GUIDE - COMPOSITE SOLUTIONS 48