State SBL85 390NE A - Manual (Page 5)

3 Servicing should only be performed by a Qualified Service Technician
TOOLS REQUIRED
• Electrical multimeter capable of measuring continuity/ ohms, ac & dc volts, amperes, microamperes,
millivolts, and frequency (hz)
• UEi Model DL289 or equivalent
• Digital manometer + 60" w. c., resolution 0.01" increments
Note: A digital manometer is required for testing pressure switches and can replace a gas pressure
gauge, draft gauge or slack tube manometer for checking gas pressure.
• UEi model EM200 or equivalent
• Water pressure gauge w/lazy hand and hose bibb connection
• Thermometer
• 1-1/16 Inch socket with extension for anode replacement
• Phillips head screwdriver
• Set of numbered drill bits
• Standard screwdrivers
• 3/8, 7/16, 1/2 and 9/16 inch open end wrench
DIGITAL MANOMETER DIGITAL MULTIMETER
WATER PRESSURE
TEST GAUGE W/LAZY
HAND AND HOSE BIBB
CONNECTION