ASA Electronics Universal Remote - Manual (Page 4)

4
Installation Instructions
1. Locate a suitable location close to “AV monitor” (Television, etc.)
2. Connect Red wire to +12VDC Accessory Source.
3. Connect Black wire to a known chassis ground -12VDC
4. Plug the other end of the DC power cord into the TBXPAL.
5. Connect TBXPAL A/V output to TV A/V input using supplied RCA cable.
6. Connect TV coax cable to “TV ANTENNA INPUT”.
7. Plug the external IR cable for remote controlling.
Connect the external IR cable and mount IR Sensor where it will be easy for viewer to use.
Item Function
1 AUDIO-LEFT OUTPUT (RCA)
2 AUDIO-RIGHT OUTPUT (RCA)
3 VIDEO OUTPUT (RCA)
4 EXTERNAL REMOTE INPUT
5 TV ANTENNA INPUT (IEC 169-2)
6 POWER INPUT
Specification
Composition Video Output 1 Vp-p @ 75 ohm
Audio Output 0.5 Vp-p @ 10K ohm
RF Input Socket IEC 169-2
TV System PAL B/G, D/K, I
DC Input / Operating Range +12VDC (10 ~ 16 VDC)
Power Consumption 4.8W (Max.)