Vaisala DMT346 - Manual (Page 151)

Chapter 7 ___________________________________________________ Calibration and Adjustment
VAISALA _______________________________________________________________________ 151
Adjustment Information
Adjustment information is shown on the device information screens; see
section Device Information on page 106. Use the display/keypad to feed
the adjustment information.
1. If you are not in the adjustment menu, press the ADJ button on the
motherboard to open the ADJUSTMENT MENU.
2.
Press the ► arrow button to select Adjustment info.
3. Select Date, press SET. Enter the date by using the arrow buttons.
Press OK.
4. Select i, press SET. Enter information text including 17 characters
at maximum by using the arrow buttons. Press OK.
5. Press EXIT to return to the basic display.
CTEXT and CDATE
Use the serial line command CTEXT to enter text in to the adjustment
information field. First press the adjustment button on the motherboard
inside the transmitter.
Example:
>ctext
Adjust. info : (not set) ? -60ºC
>
Use the CDATE command to input date to the adjustment information
field. Set the adjustment date in format YYYY-MM-DD.
Example:
>cdate
Adjust. date : (not set) ? 2004-05-21
>
Press the adjustment button on the motherboard inside the transmitter to
disable the adjustment function.