Power switch system reset buzzer reset led display – Addonics Technologies RAID RACK RR2035ASDES User Manual
Page 2
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
POWER
RESET
Buzzer
POWER
TEMP
FAN
HDD
I
O
Power Switch
System Reset
Buzzer Reset
LED Display
I
O
I
O
Punch out for port multipliers/bridges
Fans
Punch out for USIB connectors
Front
Back
Power Switch: This is the switch to power on devices connected to the power
supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of the enclosure must be turned
on first.
Reset Button: Not operational.
Buzzer Reset: Pressing the button stops the overheat buzzer from making a sound.
The buzzer will make a sound when temperature inside the storage rack exceeds the
temperature setting on the Thermal Management card.
Note: Buzzer reset switch does not silence the port multiplier buzzer.
Power LED: Lights up when the power switch is turned on.
Temp LED: Lights up when temperature setting inside the storage rack exceeds
the setting on the thermal card.
Fan LED: Normally on when fan is operational. If an abnormal condition is
detected, the LED flashes.
HDD LED: Not operational.
Power Supply
Punch out for USIB connectors
Punch out for eSATA