Structure of the mmp78 probe, Tools, Figure 2 – Vaisala MM70 User Manual
Page 13: Mmp78 probe, Figure 3, Protecting cap and plastic wrench
Advertising
Chapter 2 _____________________________________ PRODUCT OVERVIEW AND MECHANICS
Structure of the MMP78 Probe
0605-087
Figure 2
MMP78 Probe
The following numbers refer to Figure 2 on page 11.
1 = Probe MMP78. Rugged probe with a long stainless steel
shaft.
2 = Probe
filter
3 = Calibration button under the screw
4 = Manual press tool
5 = Clasp nut
6 = Fitting
body
Tools
0605-082
Figure 3
Protecting Cap and Plastic Wrench
The following numbers refer to Figure 3 on page 11:
1 = Protecting cap (including plastic wire for attaching the cap to
the probe)
2 = Plastic
wrench
VAISALA _______________________________________________________________________ 11
Advertising