Vaisala MM70 - Manual (Page 39)

Chapter 4 _________________________________________ MENU OPERATIONS AND SETTINGS
Transferring Recorded Data to PC
The recorded data can be transferred to a PC using the MI70 Link
program. The MI70 Link program can be ordered from Vaisala, see
section Accessories on page 107. You can examine the recorded data
easily in the Microsoft Windows® environment and transfer it further
on a spreadsheet program, such as, Microsoft Excel® for
modifications. Together with the USB instrument cable (optional
accessory 219687) or the serial connection cable it is easy to transfer
logged and real time measurement data from the MM70 to a PC.
When using the USB cable consider the following: the MI70 Link
program contains the driver needed for the USB connection. For the
system requirements and installation, see the back of the installation
CD. Follow the installation instructions on the CD. Check that the
USB cable is not connected. The MI70 Link Setup Wizard will install
Vaisala MI70 Link on your computer. Installing the USB instrument
driver can take a few minutes. After the installation is finished,
connect the USB cable to the USB port on your PC. Windows will
detect the new device, and use the driver automatically.
You can now start monitoring the MM70 readings in real time with a
PC using the MI70 Link program. In case the MI70 Link cannot find
the instrument, check the following:
- the MM70 is switched on
- the USB instrument cable/serial connection cable is properly
connected to the USB/serial port of your PC
- another application has not reserved the connection
VAISALA _______________________________________________________________________ 37