HighPoint RocketRAID 2210 - Manual (Page 37)

RocketRAID 2210 Driver and Software Installation
Changing Device Settings
Depending upon the hard disk in question, and support provided by the current
device driver, you can adjust settings for disk: Read Ahead, Write Cache, TCQ, and
NCQ. Each feature can be enabled or disabled individually.
S.M.A.R.T Status
You can view S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology)
data about a drive to help troubleshoot any problems that occur. You can also setup
periodical S.M.A.R.T. status checks that send notification messages when S.M.A.R.
T. thresholds are exceeded.
To view the S.M.A.R.T status of a hard disk:
1. Highlight the “Management” menu, and select the “ Device Management”
function.
2. Highlight the disk you want to examine.
3. Select the “SMART” command from the “Operation” menu, or click on the
button to display the S.M.A.R.T status/settings window.
Renaming an Array
1. Highlight the “Management” menu, and select the “Array Management”
function.
2. Highlight the array you want to rename.
3. Click the Rename button on the toolbar or select the “Rename” command from
the “Operation” menu.
4. Enter a new name for the array using the keyboard, and press the OK button to
confirm your selection.
Note: An array running background tasks cannot be renamed.
4-12